Servo Motor Drivers

TOPS have just launched a series of Universal Brushless Servo Drives.
Our BLu drives offer numerous advantages:

• All Digital Design
• Sinusoidal Commutation
• Multiple Control Modes
• Compact Size
• 24-48 VDC Input Supply

---

BLuAC5 Series Servo Drives

The BLuAC5 hardware features a powerful digital signal processor (DSP) coupled to an efficient IGBT PWM amplifier. When combined with the BLuAC5’s sophisticated, yet easy to tune position loop and velocity and acceleration feed-forward, a system capable of extremely high performance results assuring success in even the most demanding of applications.

All BLuAC5 servo drives are capable of running brushless, brush and linear type motors. A timing wizard automatically configures the encoder and commutation timing for virtually any brush or brushless D.C. motor. Tuning is easy with the Quick Tuner™ configuration software, featuring a built-in digital oscilloscope.

Features:

• BLuAC5-S and BLuAC5-Q can be commanded via ±10 VDC analog Signal or PWM in torque or velocity mode.

• BLuAC5-Si can be programmed for stand-alone operation with the easy to use Si Programmer™ Windows software (software and programming cable included).

• BLuAC5-Q can be programmed for stand-alone operation with Q Programmer™ Windows software (software and programming cable included).

• All BLuAC5 drives can be operated in real time from a host PC or PLC using the Si Command Language (SCL), via RS-232 or RS-485.

• Drives Brushless sinusoidal, Brushless trapezoidal, Brush or Linear type motors.

• 

  2 to 24 Pole Brushless motor compatibility.

• Torque, Velocity and Positioning modes.

• 90-240 VAC Single Phase or 3 Phase input.

• Continuous current of 5 A, peak currents to 15 A.

• Speeds to 8,000 RPM. Motor and load dependent.

• 16 kHz precision PWM amplifier.

• Compact size (7.75 x 2.75 x 4.75 inches).

• 24 V Isolated I/O power supply output.

• 24 V Keep Alive supply input.

• Screw terminal connectors for AC Power, Motor phases, Control Voltages and RS-485.

• Pluggable, industry standard D connector for encoder, commutation signals command signals and I/O.

• Internal Regeneration circuit and power resistor.

• Encoder / Motor connection Wizard for automatic wiring detection.

Recommended motors:

Model	Watts	Volts	Rated Torque
			Nm	lb-ins.
M0400-101-4-000	400	100	1.3	11.2
M0400-102-5-000	400	200	1.3	11.2
M0600-102-5-000	600	200	1.9	17
M0750-102-5-000	750	200	2.4	21