The BLuAC5 hardware features a powerful digital signal processor (DSP) coupled to an efficient IGBT PWM amplifier. When combined with the BLuAC5’s sophisticated, yet easy to tune position loop and velocity and acceleration feed-forward, a system capable of extremely high performance results assuring success in even the most demanding of applications.
All BLuAC5 servo drives are capable of running brushless, brush and linear type motors. A timing wizard automatically configures the encoder and commutation timing for virtually any brush or brushless D.C. motor. Tuning is easy with the Quick Tuner™ configuration software, featuring a built-in digital oscilloscope.
BLuAC5-S and BLuAC5-Q can be commanded via ±10 VDC analog Signal or PWM in torque or velocity mode.
BLuAC5-Si can be programmed for stand-alone operation with the easy to use Si Programmer™ Windows software (software and programming cable included).
BLuAC5-Q can be programmed for stand-alone operation with Q Programmer™ Windows software (software and programming cable included).
All BLuAC5 drives can be operated in real time from a host PC or PLC using the Si Command Language (SCL), via RS-232 or RS-485.
Drives Brushless sinusoidal, Brushless trapezoidal, Brush or Linear type motors.
2 to 24 Pole Brushless motor compatibility.
Torque, Velocity and Positioning modes.
90-240 VAC Single Phase or 3 Phase input.
Continuous current of 5 A, peak currents to 15 A.
Speeds to 8,000 RPM. Motor and load dependent.
16 kHz precision PWM amplifier.
Compact size (7.75 x 2.75 x 4.75 inches).
24 V Isolated I/O power supply output.
24 V Keep Alive supply input.
Screw terminal connectors for AC Power, Motor phases, Control Voltages and RS-485.
Pluggable, industry standard D connector for encoder, commutation signals command signals and I/O.
Internal Regeneration circuit and power resistor.
Encoder / Motor connection Wizard for automatic wiring detection.
Basic drive: Analog, digital and host command input.
BLuAC5-Si can be programmed for stand-alone operation, with the easy to use
Si Programmer™ Windows software with integrated tuning (software and programming cable included).
Graphical point and click format combines motion, I/O, and operator interface functionality for simple machine sequencing.
Easily integrates with other devices on the machine (Sensors, PLCs etc).
Q programming: comprehensive programming language, with options for downloading,
storing and executing multiple programs.
Our servo drivers can be used in conjunction with motor controllers to create complete motion systems.Top of page